Contents: 10 straight tracks, 2 curved tracks, control box, distribution strip, wire, plugs and sockets, and instructions. The SET extension set program is a progressive system with which you can expand track layouts from the starter sets in steps. The E 8190 or E 8191 is used to expand the 81530/81535 or 81562 set. You can then systematically expand in any sequence desired with the T1 8192, T2 8193 and T3 8194 track extension sets.

When you start off with the 81781/81785 starter sets, you already have the E 8191 track extension set integrated into the starter set, and you can then easily expand further with the T1 8192, T2 8193 and T3 8194 track extension sets. The 8198 catenary set for S+E and 8199 set for T1+T2+T3 make it easy to add working catenary operation in the SET program so that two trains can be controlled independently of each other on a track.

--------------------------------------------------------------------------------------------------

Some old ballast still stuck to some peices of track and the right hand point wires are shorter than the left hand point.

Contents: 6 straight tracks, 6 curved tracks, 2 electric curved turnouts, control box, distribution strip, wire, plugs and sockets, and instructions. The SET extension set program is a progressive system with which you can expand track layouts from the starter sets in steps. The E 8190 or E 8191 is used to expand the 81530/81535 or 81562 set. You can then systematically expand in any sequence desired with the T1 8192, T2 8193 and T3 8194 track extension sets.

When you start off with the 81781/81785 starter sets, you already have the E 8191 track extension set integrated into the starter set, and you can then easily expand further with the T1 8192, T2 8193 and T3 8194 track extension sets. The 8198 catenary set for S+E and 8199 set for T1+T2+T3 make it easy to add working catenary operation in the SET program so that two trains can be controlled independently of each other on a track.

--------------------------------------------------------------------------------------------------

Some old ballast still stuck to some peices of track and the right hand point wires are shorter than the left hand point.

Contents: 8 straight tracks, 2 curved tracks, 2 electric curved turnouts, control box, distribution strip, wire, plugs and sockets, and instructions. The SET extension set program is a progressive system with which you can expand track layouts from the starter sets in steps. The E 8190 or E 8191 is used to expand the 81530/81535 or 81562 set. You can then systematically expand in any sequence desired with the T1 8192, T2 8193 and T3 8194 track extension sets.

When you start off with the 81781/81785 starter sets, you already have the E 8191 track extension set integrated into the starter set, and you can then easily expand further with the T1 8192, T2 8193 and T3 8194 track extension sets. The 8198 catenary set for S+E and 8199 set for T1+T2+T3 make it easy to add working catenary operation in the SET program so that two trains can be controlled independently of each other on a track.

--------------------------------------------------------------------------------------------------

Some old ballast still stuck to some peices of track and the both points have wires that have are shorter than when they where new.

Comes in original box with instructions and plugs.

Length 110 mm / 4-3/8". 13°. Radius 490 mm / 19-1/4". The 8562 left and the 8563 right turnouts have double solenoid mechanisms and hand levers. They can be activated with the 7272/72720 control box or with circuit tracks.

Comes in original box with instructions and plugs but one fishplate is missing.

Length 110 mm / 4-3/8". 13°. Radius 490 mm / 19-1/4". The 8562 left and the 8563 right turnouts have double solenoid mechanisms and hand levers. They can be activated with the 7272/72720 control box or with circuit tracks.

Comes in original box with instructions and plugs but one fishplate is missing.

Length 110 mm / 4-3/8". 13°. Radius 490 mm / 19-1/4". The 8562 left and the 8563 right turnouts have double solenoid mechanisms and hand levers. They can be activated with the 7272/72720 control box or with circuit tracks.

Comes in original box with instructions and plugs, fishplates missing.

Radius 195 mm / 7-11/16". 30° (same as 8521.) Main track length 25 mm / 1". The 8568 left and the 8569 right curved turnouts as well as the 8560 double slip switch have double solenoid mechanisms and hand levers. They can be activated with the 7272/72720 control box or with circuit tracks.

Comes in original box with instructions and plugs, fishplates missing.

Radius 195 mm / 7-11/16". 30° (same as 8521.) Main track length 25 mm / 1". The 8568 left and the 8569 right curved turnouts as well as the 8560 double slip switch have double solenoid mechanisms and hand levers. They can be activated with the 7272/72720 control box or with circuit tracks.